FILTER FOR LOURDES HYDROGEN WATER GENERATOR
Lourdes hydrogen water generator has filter which needs to be changed every 6 to 7 months on basis of hydrogen water generation of 6 L per day.
For high-quality durable use, the electrolysis tank of the Lourdes generator is equipped with a replaceable filter. It consist of resin ions that prevents corrosion and the formation of excessive mineral deposits on the electrodes by removing calcium and magnesium ions, softening the water used for electrolysis.
1. Drain the water through the drainage. (The drainage is located at the back side).
2. Open the water tank lid counter in clockwise direction.
3. Pull out the old filter. (Check the picture).
4. Install new filter for Lourdes hydrogen water generator.
Close the drainage. Pour about 200-300 ml purified water (do NOT overflow it) into electrolysis tank and close the lid.
•Water can be supplied slowly after replacing the filter. So the operating time can be delayed. (Takea bout 3-10min).
•When there is no water comes to the sponge, take out the filter and install it again.
•Sometimes yellow water can be flowed into the sponge area. Note that it’s not harmful for health. Please drain this water and replace with new water.
•Filter for Lourdes hydrogen water generator service time is 6-7 months.(Generation of hydrogen water – 6 liters per day).
There are no reviews yet.